My Lovely Followers

Monday, 20 November 2017

Whimsy Stamps/Lee Holland - Teddy Christmas

Hello!

I've been thinking about no line colouring a lot recently, experimenting with different colouring techniques is not something that I really get the time to do lately, but I have been wanting to try this out with my Zig Markers for some time.

However this technique was covered, using Copics (I have done the technique in Copics back when I used to colour with them), at the recent Whimsy Craft retreat, and although some of the steps didn't really work with Zig markers, I thought I would give it a go. Whilst the effect wasn't perfect (particularly as I did not have the right stamping ink with me!), it intrigued me enough to find some time to work on it at home. Due to time and work constraints, I had to do this in 2 separate sittings spaced some weeks apart, but I'm happy to say that I finally got it finished and on a card.

So this is Teddy Christmas, no lines water coloured with Zig Markers.


I used the following Zig Markers to colour him:

Turquoise Green, Persian Green, Pink, Dark Pink, Light Gray, Mid Gray and Dark Gray.

I fussy cut him out and popped him up on some foam tape on a card base made from Grout Gray cardstock with some pink gingham paper.

The Christmas is cut with an older discontinued Whimsy die from some pink glitter paper and the sentiment, stamped with Peacock Feathers Distress Oxide ink, is from the St Nicholas stamp set.

I finished off with a few enamel dots.

Teddy ChristmasSt. Nicholas*NEW Summer Breeze Enamel Dots

That's all from me today, thanks for dropping by!


Thursday, 9 November 2017

Whimsy Stamps - Balancing Elf

Hello!

I have a little Whimsy Stamps inspiration for you today, but please excuse the lighting on my photo which isn't as great as i would like. The nights are really drawing in now, especially since the clocks went back an hour here and it really is very dark by the time I get home from work now.

Anyhooooooo.............I made this CAS card using last the rubber stamp 'Balancing Elf' from last month's release, which I stamped onto some Bristol Smooth paper and watercoloured with my Zig Markers, I really do seem to be using these all the time now.
Once finished I cut out my image with one of the Hand Stitched Nested Rectangles dies and stamped in green with one of the Fadoodle stamps.


I cut some green gingham patterned paper with the largest of the Hand Stitched Rectangles, and adhered that to my card base, then I glued my image directly on top.
I stamped a sentiment from the Oh What Fun stamp set, masking off the first part of the sentiment, and cut a little banner in bright pink card stock to match the colour of the wrapping on the top present. To finish off I added a few Christmas Cheer enamel dots.

I do think that this year I've managed to make more Christmas cards than ever before, how about you, are you ready for Christmas, getting there, haven't even started yet?

I've included links to the items in the Whimsy shop below, you can get there by clicking on the image.



Balancing ElfHand Stitched Nested RectanglesOh What FunFaDoodlesChristmas Cheer Enamel Dots

Thanks for visiting!





Wednesday, 8 November 2017

MFT Woofing you a Happy Birthday

Hello!

I have a fun little card to share with you today.

Using an older MFT Stamp Set, Birdie Brown's Lucky Dog, I first randomly stamped my little dog all over a piece of Strathmore Bristol Smooth paper with Black Versafine Ink, also stamping some paw prints from the same set.

I coloured these in with my Zig Markers and trimmed my panel with a large rectangle die and adhered it to a card base made with some Limelight card stock.
I coloured up an extra dog and cut that out with the matching Die-namics.


I stamped a sentiment from the set in black ink on a scrap of Limelight card stock cut out with a banner die from Blueprints 20.
I cut a panel of heavyweight vellum and adhered that, centering it over my base, and hiding the glue b
behind the elements. I added my banner and my little dog with some foam tape, and finished with a few enamel dots.

I hope you like it, this one was lots of fun to make.


Friday, 3 November 2017

Whimsy Stamps November Release Countdown Day 3

Hello!

It's day 3 of the countdown to the November release over at Whimsy stamps, and today my cards used the Leaf Foliage 2 die set and card 1 also uses the Happy Headlines stamp set from Wednesday's countdown. 

I also used this die set on the card I shared for day one, but I used the dies to emboss rather than cut.


For the first card I used Distress Oxide Inks to colour my leaves and then used sprays made with Ken Oliver's Liquid Metals. I used some splatters of the liquid metals to decorate the white panel and also some Nuvo Crystal Drops in Copper Penny.

For my 2nd card I made a background panel using yellow and orange distress inks. I used some spatters of water and some white paint and also added a few spots of shimmer. I cut a circle from my panel of black cardstock and cut some leaves in black cardstock to look like silhouettes
I added the die cut word Serenity using one of the dies from the Gratitude die set
I popped up the panel with some foam tape on a black card base and
 finished with a few clear sequins..



Gratitude Word Die Set

Thanks for dropping by!


Wednesday, 1 November 2017

Whimsy Stamps November Release Countdown Day 1

Hello!

It's time for day one of the countdown to the November release over at Whimsy Stamps and my card today uses the new 

Happy Headlines

clear stamp set.

These sentiments make a great focal point for your card which is how I've used one today.

My sentiment is stamped with Seedless Preserves Distress Oxide Ink and then heat embossed with clear embossing powder.

I've included the graphic for the stamp set below so that you can see what other sentiments are in the set, but I can't add a working link for your until the release is live on the 7th.



Oh and if you are wondering what I used to emboss my background, make sure you check out tomorrow's post!

Thanks for dropping by



Monday, 30 October 2017

Christmas Mail


Hello!

A while back I made a card using some dies from MFT and whilst I shared it on Facebook I totally forgot to share this creation on my Blog and on Instagram. So I'm rectifying that today.



I used some cute Christmas papers by Lemoncraft, the Mail Delivery Die-namics, the Mini Mail Die-namics, and the keyhole from the Lock and Key Die-namics all from MFT Stamps to make this card. Other dies are also from MFT Stamps but are no longer available.

Thanks for visiting! 



Saturday, 28 October 2017

Whimsy Stamps - Halloween Countdown

Hello!

Over at the Whimsy Stamps Blog we've been enjoying 31 nights of Halloween spooktacular!
It's a great event with loads of fun posts and prizes. Click on the banner above for details of how you can win a grand prize of

GRAND PRIZE $50 Whimsy Stamps Shopping Spree!!

We're almost to the witching hour, just 3 more days to go and today it's my turn to share something.
Now when you look at my 'Halloween' card, you'll see that it actually has a birthday sentiment on it. This is because in the UK we don't really send Halloween cards and our Halloween celebrations are really not so spectacular as over in the USA. 
However, people DO have birthday's on or around the Halloween celebration, so this still counts as a Halloween card right? 


I really wanted to give my card a fab spooky background, so I used my Distress Oxide inks to blend a moody night sky lit by the moon's glow, masking the moon and then colouring in later with a mix of Distress Oxide ink and a couple of grey toned Zig markers.

I coloured my vampire to coordinate with my background, with Zig markers and cut him out with the matching die. I die-cut the rest of my elements from black card stock, heat embossing my sentiment in white on top of my large gravestone and assembled my card. 

I added a little ink and some Wink of Stella to some of my elements to give them a glow and sparkle, and added some dots of white pen and glitter pen to my sky to look like stars.

I mounted my panel onto a plain black card base and just like magic (black of course) my card was complete.

I've added all the Whimsy products used below, with links to the items.

Dracula Bite MeDracula Bite Me Die SetDracula's Coffin Die Set

I have a prize to giveaway today, so for the chance to win  please leave me a comment below telling me what you usually do to celebrate Halloween. You have till the 30th October to enter, and the winners will all be announced on the Whimsy Blog on the 31st.

Don't forget to check the blog every night for more Halloween fun and giveaways!

Thanks for visiting!


Whimsy Stamps - Snow Flurry - Simple Cards

Hello!

I have a couple of simple Christmas cards to share with you that look impressive but actually take very little time to make. 

My first card used the Snow Flurry Background Stamp and the Snow Flurry Clear Stamp Set.


I used some Strathmore Bristol Smooth paper to stamp and heat emboss the background stamp and also to stamp and heat emboss one of the snowflakes from the clear stamp set.  I used Shaded Lilac distress ink over the back ground stamp and to accent the snowflake. The sentiment is from the St Nicholas Clear Stamp Set. I popped up my front panel on some craft foam and finished my card simply with some purple gems.

For my second card I stamped some of the Snow Flurry snowflake stamps onto some Strathmore Bristol Smooth paper with Versamark Ink and heat embossed with gold embossing powder. I also stamped another sentiment from the St Nicholas stamp set and heat embossed that in gold to match.




I then did some ombre ink blending using Worn Lipstick and Abandoned Coral distress ink. After cutting out my panel I sprinkled a few drops of water and lifted a little colour for interest. I didn't have any gold cardstock so I embossed the edge of my card and then mounted my panel right on top so there was just a thin gold outline.
I finished the card with some Pale Gold Nuvo Drops.

Below you can find links to the items I used.

*NEW Snow Flurry Background*NEW Snow Flurry*NEW St. Nicholas


I'll be back later with a special Halloween post and a chance to win a prize!


Monday, 23 October 2017

CASE a card Monday - Polar Bear Pals

Hello!

It's been a while since I did a CASE a card Monday, so I thought I would pop one in today.

This shaker card was inspired by a card made by Debbie Olsen, you can find her blog here.

I used the Polar Pals stamp set again, which I fussy cut, not having the dies, theMFT Pierced Rectangle Frames, (which are no longer available I believe, although you can get stitched ones that are almost identical), and a couple of dies from Blueprints 15 and 20.

My skating bear is coloured with Zig Markers to coordinate with this lovely MFT paper.


The background for the shaker window is made using the MFT Cloud Stencil and Salty Ocean distress ink and the shaker selection is from Little Things by Lucy's Cards.

This is the card by Debbie that I cased. Unfortunately I couldn't find a direct link to the card on Debbie's blog, but I have linked to her blog above.

Handmade card from Debbie Olson featuring Birdie Brown Cool Day

That's all from now, but I'll be along later with some more Whimsy Inspiration for you.

See you later!


Thursday, 19 October 2017

Beary Good Birthday

Hello! I'm trying my hardest to go through my draft folder and share some of my MFT cards there, before sharing some of the newer ones made with my latest haul....it's hard....oooh look shiny! lol!

But as Blue Peter (UK peeps should understand this one) would say, here's one I made earlier.


I combined the Polar Bear Pals set (I don't have the matching dies so I fussy cut them out), with the Concentric Circle Grid Stencil (I used Peacock Feathers, Cracked Pistashio and Shaded Lilac Distress Inks and my Clarity Stencil Brushes), the largest rectangle from Blueprints 15 and the smaller rounded rectangle die from Blueprints 31, to make a winter birthday card.

I thought this stencil kind of gave the feel of an igloo.

The bears are coloured with Zig Markers and a watercolour brush on Strathmore Bristol Smooth and I popped them up with some foam tape. I glued the whole thing to a lilac card base.

I finished my card with a few sequins for a little interest.

Thank you so much for taking the time to visit.


Thursday, 12 October 2017

Whimsy Retreat 2017 - Class Projects

Hello!

I'm back from the Whimsy Craft Retreat 2017, held in Orlando, Florida and super excited to show you the cards we made in the classes I taught there this year.

All 3 classes were taught using new products from the October release, and I've listed those at the end of my post for you with links to the items in the shop.

My first class covered a 2 for 1 project where we made a shaker card and then made a card using the waste from this card with just a few additional pieces.

 For the card above I heat embossed the Snow Flurry BG stamp in white, on Strathmore Bristol Smooth paper and then used Distress Oxide Inks in Wilted Violet, Peacock Feathers and Cracked Pistachio to blend over. I gave a light spray and sprinkled some drops of water before drying thoroughly.

I then cut out my panel with a rectangle die and cut out the SNOW die from the middle, being careful to save all the waste (except the middle of the O which is used on this card) to use on my second card.
I adhered a panel of acetate behind the aperture and glued the middle of the O back on the front.

I carefully attached foam tape to the back being careful to surround my word aperture with no gaps and rubbed the inside lightly with a dryer sheet (this is to prevent the sequins sticking to the static) and filled with a sequin selection that went with the colours of ink I used.
I glued a piece of white card to the back to prevent the sequins falling out and then glued the whole panel to my card base.

I stamped a sentiment from the Snow Flurry stamp set in the same Distress Oxide inks I used to blend my background and fussy cut them out, adhering them to the front of my card over the shaker portion with some Multi Medium Matte. I finished with a few sequins to match the those inside the shaker.


For my second card, I trimmed the waste 'frame' from cutting the panel for my first card to fit my card base and stuck it in place. I then cut a panel of white card stock to fit the inside of the frame and cut the SNOW word die out, towards the bottom of the panel, making sure it was centred and level. This is to use as a guide when adding back the stacked letters as it's easier to get the die straight than all the individual letters.
I stamped a sentiment from the Snow Flurry stamp set onto my panel in black ink and stuck the whole panel to my base card.

I cut the SNOW die cut 3 times from white cardstock and glued each of the letters in a stack, finishing with the patterned letters that were left from our shaker card and glued those in place on my card, using the negative die cut as a guide. 

I stamped 3 of the snowflakes from the Snow Flurry stamp set with Versamark ink and heat embossed in white and then blended over some Distress Oxide inks to match my background. I then cut them with the matching dies and mounted them on my card with a little foam tape.
I finished off with a few gems.

For my second class we got messy with a little ink smooshing and used the Snow Flurry stamp set and matching dies.


I used some distress Oxide Inks again (you could do the smooshing with normal distress or dye inks, but the stamping of the snowflakes would not be as crsip with normal distress inks), along with some Tim Holtz water colour paper,  and smooshed each colour separately, drying fully before moving onto the next.

Once fully dry I flicked with a little white acrylic paint and then stamped my sentiment from the set in black ink.

I stamped 3 of the snowflakes onto white cardstock, from the set using ink to match and cut them out with the matching dies.

I trim my panel to be a little smaller than my card base and add it to the base on top of a layer of cradt foam. I add the snowflakes with foam tape for a little extra dimension and finish with a few clear gems.

My 3rd and final class of the day (I did also do another optional evening workshop covering colouring images with Zig markers and distress inks/markers), covered loose water colouring and the camouflage die-cutting technique.


As with my first card I used the Snow Flurry BG stamp and white embossing powder to stamp and heat emboss a panel of Strathmore Bristol Smooth.

I then took 2 colours of Zig markers, (in this case Pink and Turquoise Green), and a waterbrush and loosely coloured the snowflakes, (by loosely I mean that the effect was quite watery and I didn't worry about colouring outside the lines, in fact it's pretty much encouraged), in pink and some of the loops and swirls in green. I's best to let one colour dry fully before moving onto the second so they are less likely to bleed into each other.

Once fully dry I cut it out with a large rectangle die and used the SNOW large word die to cut out my word from the centre of the card.
I made a card base with some bright pink card stock and adhered my panel directly to my base and then cut the SNOW die another 4 times from the same pink card stock.
I glued the letters in stacks, finishing with the patterned ones and glued them back into the aperture .

I heat embossed a sentiment in white, from the Abstract Christmas stamp set onto a scrap of pink card stock and cut out the sentiment with a banner die which I mounted across the bottom of my word using foam tape.

I finished the card with a few clear sequins.

Whimsy Products Used
Please click on the picture to go to the item in store

*NEW Snow Flurry Background*NEW Snow Flurry*NEW Snow Flurry Die Set*NEW Snow Word and Snow Caps Die SetAbstract Christmas


I did take a few photos at the retreat and I'll be doing a bit of a write up later about what we did, but for now I hope you enjoy the makes from my classes.

Thanks for visiting!